World Leader in
Potlining Equipment

Model : E-02

Tool Box

Tool box available in different models. Designed for the storage or transport of tools.

Key feature(s)

Different models available

Location

Carbon / Anode

Key function(s)

Storage or transport of tools

Request a data sheet

Model : E-04

Heating System

The heating system is used to warm up surfaces. It insures an homogeneous control of the temperature. The system is made of a portable heating electric unit that is connected to an inflated mattress.

Key feature(s)

Homogeneous control of the temperature

Location

Carbon / Anode

Key function(s)

Surface preheating

Request a data sheet

Model : E-06

Cutting Saw

The E06 for brick cutting and assembling, is available in two options: table saw and assembling bench. The table saw cuts multiple bricks at the same time, while avoiding any contact between operator and materials during operation.
The assembling bench is a 2 in 1 equipment that can cut bricks and assembled them in modules. Brick modules are used for the brickwork of the electrolysis cells. Their installation within a pot, is performed with the Potlining Machine E60 and with the brick lifter. Brickwork by brick modules allows considerable optimisation of productivity and safety during this step of the potlining process.
same time. It prevents the operator from having physical contact with the materials during operation. 

Key feature(s)

Can cut several bricks at the same time

Location

Carbon / Anode

Key function(s)

Cut of refractory materials

Request a data sheet

Model : E-07

Portable Handrails System

This equipment is made of mobile handrails and platforms. It is designed to create a secure access on a work surface or work area.

Key feature(s)

Manual installation

Location

Carbon / Anode

Key function(s)

Safe access

Request a data sheet

Model : E-08

Mobile Handling System

This equipment is designed to handle and lift refractory materials, thanks to its vacuum system.

Key feature(s)

Vacuum system

Location

Carbon / Anode

Key function(s)

Handling and lifting of refractory materials

Request a data sheet

Model : E-10

Portable Concrete Mixer

Different models of mixers are available. European and american standards available.

Key feature(s)

Portable

Location

Carbon / Anode

Key function(s)

Concrete mixing

Request a data sheet

Model : E-11

Temporary Platforms

The temporary platforms are used to create a safe workspace on a work surface or on operation floor.

Key feature(s)

Adjustable size

Location

Carbon / Anode

Key function(s)

Safe access

Request a data sheet

Model : E-12

Portable Support

This equipment is designed to support temporarily structures, equipment parts and more.

Key feature(s)

Portable

Location

Carbon / Anode

Key function(s)

Temporary support

Request a data sheet

Model : E-18

Storage Rack

The portable storage racks can be used to transport and/or store tools and accessories.

Key feature(s)

Many models available

Location

Carbon / Anode

Key function(s)

Transport or storage of tools

Request a data sheet

Model : E-23

Tilting Wheelbarrow

This equipment can transport materials (such as cement and concrete) from the mixer to wherever needed. Having a pneumatic system, it can unload its content autonomously, without an external source of power.

Key feature(s)

Autonomous unloading of materials

Location

Carbon / Anode

Key function(s)

Materials transport

Request a data sheet

Model : E-24

Lifting Forks

The self-balancing fork is used to lift materials and designed to be hooked on lifting/handling appliances. It has an automatic self-balancing system and adjustable height and handles.

Key feature(s)

Self-balancing system

Location

Carbon / Anode

Key function(s)

Materials lifting

Request a data sheet

Model : E-27

Portable Milling and Welding Platform

This equipment is designed to repair the surface of a structure or equipment. Its milling module grinds the surface area whereas its welding module rebuilds the surface. Automatic milling and welding.

 

Key feature(s)

Two modules: milling and welding

Location

Carbon / Anode

Key function(s)

Surface repair

Request a data sheet

Model : E-30

Portable Cleaner

Lightweight and portable, this equipment can vacuum the majority of dust type.

Key feature(s)

Portable

Location

Carbon / Anode

Key function(s)

Dust vacuuming

Request a data sheet

Model : E-31

Manual Tamper

This equipment is used to compact materials (such as sand and other). Different models of pneumatic and electric tamper are available.

 

Key feature(s)

Pneumatic or electric tamper

Location

Carbon / Anode

Key function(s)

Materials compaction

Request a data sheet

Model : E-42

Lifting Beam

The lifting beam is designed to lift and/or handle materials (such as blocks and other). It can be hooked on lifting appliances.

Key feature(s)

Compatible with different lifting appliances

Location

Carbon / Anode

Key function(s)

Materials lifting

Request a data sheet

Model : E-45

Removable Platform

The removable platform is designed to provide an access to a structure. The equipment is supported by a portable frame.

Key feature(s)

Manual installation

Location

Carbon / Anode

Key function(s)

Safe access

Request a data sheet

Model : E-55

Safety Guards

This equipment can be used to create a safety zone on a work area or on the upper part of an equipment or structure.

Key feature(s)

Removable parts

Location

Carbon / Anode

Key function(s)

Safe access

Request a data sheet

Model : E01

Temporary Potlining Facility/Configuration

The temporary potlining facility and/or reconfiguration of an existing workshop, can be used as a transition or permanent workshop (as needed). 

Key feature(s)

Includes all the necessary services (eletrical and mechanical)

Location

Potlining

Key function(s)

Temporary workshop

Request a data sheet

Model : E02

Tool Box (type 3)

Tool box available in different models. Designed for the storage or transport of cathode rodding tools.

Key feature(s)

DIfferent models available

Location

Cathode Rodding

Key function(s)

Storage or transport of tools

Request a data sheet

Model : E02

Tool Box (type 1)

Tool box available in different models. Designed for the storage or transport of potlining tools.

Key feature(s)

Different models available

Location

Potlining

Key function(s)

Storage or transport of tools

Request a data sheet

Model : E02

Tool Box (type 2)

Tool box available in different models. Designed for the storage or transport of ramming tools.

Key feature(s)

Different models available

Location

Pot ramming

Key function(s)

Storage or transport of tools

Request a data sheet

Model : E03

Superstructure Repair Shop

Support and fixture used to position the superstructure during maintenance. Tools and equipment available on request.

Key feature(s)

Can be adapted as per client needs

Location

Superstructure repair shop

Key function(s)

Superstructure repair shop

Request a data sheet

Model : E04

Cathode Heating System (type c)

The cathode heating system is used to warm up cathode blocks during cathode rodding operations. It insures an homogeneous control of the temperature. The system is made of a portable heating electric unit that is connected to an inflated mattress.

Key feature(s)

Homogeneous control of the temperature

Location

Cathode rodding

Key function(s)

Cathode blocks preheating

Request a data sheet

Model : E04

Cathode Heating System (type a)

The cathode heating system is used to warm up cathode blocks during potlining operations. It insures an homogeneous control of the temperature. The system is made of a portable heating electric unit that is connected to an inflated mattress.

Key feature(s)

Homogeneous control of the temperature

Location

Potlining

Key function(s)

Cathode blocks preheating

Request a data sheet

Model : E04

Cathode Heating System (type b)

The cathode heating system is used to warm up cathode blocks during pot ramming operations. It insures an homogeneous control of the temperature. The system is made of a portable heating electric unit that is connected to an inflated mattress.

Key feature(s)

Homogeneous control of the temperature

Location

Pot ramming

Key function(s)

Cathode blocks preheating

Request a data sheet

Model : E06

Refractory Saw

The E06 for brick cutting and assembling, is available in two options: table saw and assembling bench. The table saw cuts multiple bricks at the same time, while avoiding any contact between operator and materials during operation.

The assembling bench is a 2 in 1 equipment that can cut bricks and assembled them in modules. Brick modules are used for the brickwork of the electrolysis cells. Their installation within a pot, is performed with the Potlining Machine E60 and with the brick lifter. Brickwork by brick modules allows considerable optimisation of productivity and safety during this step of the potlining process.

Key feature(s)

Can cut several bricks at the same time

Location

Potlining

Key function(s)

Cut of refractory materials

Request a data sheet

Model : E07

Pot Safety Handrails System

This equipment is made of mobile handrails and platforms. It is designed to provide a secure access on adjacent operated pots during pot replacement.

Key feature(s)

Manual installation

Location

Potroom

Key function(s)

Safe access

Request a data sheet

Model : E08

Vacuum Handling System

The equipment is designed to handle and carry refractory materials during potlining operations. 

Key feature(s)

Vacuum system

Location

Potlining

Key function(s)

Handling and carrying of refractory materials

Request a data sheet

Model : E09

Positive Risers Support

This equipment is used to hold the positive risers weight during the transport of a superstructure. The support can fit a superstructure in any direction.

Key feature(s)

Rotary system

Location

Superstructure repair shop

Key function(s)

Positive risers support

Request a data sheet

Model : E10

Concrete Mixer

Different models of mixers are available. European and american standards available.

Key feature(s)

Many models available

Location

Potlining

Key function(s)

Concrete mixing

Request a data sheet

Model : E11

Bus Bar Level Platform

The temporary bus bar platforms create a safe workspace on the bus bar level and on operation floor within potroom.

Key feature(s)

Adjustable size

Location

Potroom

Key function(s)

Safe access

Request a data sheet

Model : E12

Temporary Support

This equipment is designed to support temporarily the straight gas exhaust duct throughout the removal of a superstructure.

Key feature(s)

Adjustable height

Location

Potroom

Key function(s)

Temporary support

Request a data sheet

Model : E15

Anode Beam Jack Control System

This equipment can adjust the level of a superstructure anode beam and. It can also supply power to DPA and verify their functioning.

Key feature(s)

Controls the mechanism of a superstructure anode beam

Location

Superstructure repair shop

Key function(s)

Anode beam adjustment

Request a data sheet

Model : E17

Flashing Safety Light

The flashing safety light can delimit a work area within an operating or non-operating, environment. It works without an external power source and can operate under the influence of magnetic fields.

Key feature(s)

Works without an external source of power

Location

Potroom

Key function(s)

Work area delimitation

Request a data sheet

Model : E18

Portable Storage Rack (type 1)

The portable storage rack can be used to transport and/or store accessories used within superstructure repair shop operations.

 

Key feature(s)

Many models available

Location

Superstructure repair shop

Key function(s)

Transport or storage of superstructure repair shop accessories

Request a data sheet

Model : E18

Portable Storage Rack (type 2)

The portable storage rack can be used to transport and/or store accessories used within potlining operations.

Key feature(s)

Many models available

Location

Potlining

Key function(s)

Transport or storage of potlining accessories

Request a data sheet

Model : E18

Portable Storage Rack (type 3)

The portable storage rack can be used to transport and/or store accessories used within pot ramming operations.

 

Key feature(s)

Many models available

Location

Pot ramming

Key function(s)

Transport or storage of pot ramming accessories

Request a data sheet

Model : E20

Superstructure Trailer

This trailer can move and/or store a complete superstructure.

Key feature(s)

Portable equipment (wheels)

Location

Superstructure repair shop

Key function(s)

Transport and storage of superstructure

Request a data sheet

Model : E22

Potlining Stairs

The potlining stairs are designed to provide a safe access to a pot during the potlining process. They have a self-adjusting system which activates during installation.

Key feature(s)

Different models available

Location

Potlining

Key function(s)

Safe access

Request a data sheet

Model : E23

Tilting Bucket

This equipment can transport materials (such as cement and concrete) from the mixer to wherever needed. Having a pneumatic system, it can unload its content autonomously, without an external source of power.

Key feature(s)

Autonomous unloading of materials

Location

Potlining

Key function(s)

Materials transport

Request a data sheet

Model : E24

Self-Balancing Fork

The self-balancing fork is used to lift materials (such as bricks or pallets) and designed to be hooked on lifting/handling appliances (such  as the potlining machine E60). It has an automatic self-balancing system and adjustable height and handles.

Key feature(s)

Self-balancing system

Location

Potlining

Key function(s)

Materials lifting

Request a data sheet

Model : E27

Anode Beam Contacts Repair Units (milling and welding)

This equipment is designed to repair the anodic contacts zone of a superstructure anodic beam. Its milling module grinds the contact area whereas its welding module rebuilds the aluminium surface. Automatic milling and welding.

Key feature(s)

Two modules: milling and welding

Location

Superstructure repair shop

Key function(s)

Anodic contacts zone repair

Request a data sheet

Model : E30

Portable Vacuum Cleaner (type 1)

Besides being lightweight and portable, this equipment can vacuum the majority of dust type. 

Key feature(s)

Portable

Location

Potlining

Key function(s)

Dust vacuuming

Request a data sheet

Model : E30

Portable Vacuum Cleaner (type 2)

This equipment can vacuum the majority of dust type. It is lightweight and portable. Designed to be used within the pot ramming process.

Key feature(s)

Portable

Location

Pot ramming

Key function(s)

Dust vacuuming

Request a data sheet

Model : E31

Tamper for Ramming (type a)

This equipment is used to compact the ramming paste during the potlining process. Different models of pneumatic and electric tamper are available.

Key feature(s)

Pneumatic or electric tamper

Location

Potlining

Key function(s)

Ramming paste compaction

Request a data sheet

Model : E31

Tamper for Ramming (type b)

This equipment is used to compact the ramming paste during the pot ramming process. Different models of pneumatic and electric tamper are available.

Key feature(s)

Pneumatic or electric tamper

Location

Pot ramming

Key function(s)

Compaction of the ramming paste

Request a data sheet

Model : E33

Superstructure Rotator

This equipment can carry and rotate a complete superstructure on 360o. Equipped with a pivot system, the rotator is operated manually (no external source of power).

Key feature(s)

Manual rotation

Location

Superstructure repair shop

Key function(s)

Rotation of a superstructure

Request a data sheet

Model : E36

Insulating Blanket (type a)

The insulating blanket is used to maintain the cathode blocks temperature on a stable level during the potlining process.

Key feature(s)

Even temperature distribution

Location

Potlining

Key function(s)

Maintain the cathode blocks temperature

Request a data sheet

Model : E36

Insulating Blanket (type b)

The insulating blanket is used to maintain the cathode blocks temperature on a stable level during the pot ramming process.

Key feature(s)

Even temperature distribution

Location

Pot ramming

Key function(s)

Maintain the temperature of cathode blocks

Request a data sheet

Model : E38

Heated Box for Lining Paste (type a)

The heated box for lining paste is designed to transport the lining paste and to keep its temperature stable.

Key feature(s)

Even temperature distribution

Location

Potlining

Key function(s)

Transport and heating of lining paste

Request a data sheet

Model : E38

Heated Box for Lining Paste (type b)

The heated box for lining paste is designed to transport the lining paste and to keep its temperature stable.

Key feature(s)

Even temperature distribution

Location

Pot ramming

Key function(s)

Transport and heating of lining paste

Request a data sheet

Model : E39

Paste Heating Tent (type a)

The paste heating tent is designed to homogeneously heat the lining paste during the potlining process. It is made of an heating tent and of an electric unit.

Key feature(s)

Even temperature distribution

Location

Potlining

Key function(s)

Lining paste heating

Request a data sheet

Model : E39

Paste Heating Tent (type b)

The paste heating tent is designed to homogeneously heat the lining paste during the pot ramming process. It is made of an heating tent and of an electric unit.

Key feature(s)

Even temperature distribution

Location

Pot ramming

Key function(s)

Lining paste heating

Request a data sheet

Model : E40

Removable Tent for Potlining

This equipment can preheat a pot In Situ during the potlining process. It is designed to optimize the work area.

Key feature(s)

Optimize work area

Location

Potlining

Key function(s)

Preheating of a pot In Situ

Request a data sheet

Model : E40

Removable Tent for Pot Ramming

This equipment can preheat a pot In Situ during the ramming process. It designed to optimize the work area.

Key feature(s)

Optimize work area

Location

Pot ramming

Key function(s)

Preheating of a pot In Situ

Request a data sheet

Model : E41

Tent for Potlining Machine E60

This equipment is used to preheat a pot In SItu. The tent fits within the dimensions of the potlining machine E60, and is able to ''follow'' its movements.

Key feature(s)

Installed on a pot In Situ and on potlining machine E60

Location

Potlining

Key function(s)

Preheating of a pot In Situ

Request a data sheet

Model : E41

Tent for Pot Ramming Machine E61

This equipment is used to preheat a pot In Situ. The tent fits within the dimensions of the pot ramming machine E61, and is able to ''follow'' its movements.

Key feature(s)

Installed on a pot In Situ and on pot ramming machine E61

Location

Pot Ramming

Key function(s)

Preheating of a pot In Situ

Request a data sheet

Model : E42

Cathode Lifting Beam (type 2)

The cathode lifting beam is designed to lift and/or handle cathode blocks during cathode rodding operations. It can be hooked on lifting appliances (such the potlining machine E60).

Key feature(s)

Can be used with different lifting appliances

Location

Cathode rodding

Key function(s)

Cathode blocks lifting

Request a data sheet

Model : E42

Cathode Lifting Beam (type 1)

The cathode lifting beam is designed to lift and/or handle cathode blocks during potlining operations. It can be hooked on lifting appliances (such the potlining machine E60).

Key feature(s)

Compatible with different lifting appliances

Location

Potlining

Key function(s)

Cathode blocks lifting

Request a data sheet

Model : E43

Generic Tools for Potlining

Engineering and manufacturing of various tools for potlining operations.

Key feature(s)

Many models available

Location

Potlining

Key function(s)

Tools for potlining operations

Request a data sheet

Model : E43

Generic Tools for Pot Ramming

Engineering and manufacturing of various tools for pot ramming operations.

Key feature(s)

Many models available

Location

Pot ramming

Key function(s)

Tools for pot ramming operations

Request a data sheet

Model : E45

Spout Removable Platform

The spout removable platform is designed to provide an access to a superstructure spouts during operation. The equipment is supported by a portable frame, retained by the superstructure ceiling.

Key feature(s)

Manual installation

Location

Potroom

Key function(s)

Safe access

Request a data sheet

Model : E46

Generic Tools for Pot Start-Up

Engineering and manufacturing of various tools for pot start-up.

Key feature(s)

Many models available

Location

Potroom

Key function(s)

Tools for pot start-up

Request a data sheet

Model : E47

Generic Tools for Cathode Rodding

Engineering and manufacturing of various tools for cathode rodding operations.

Key feature(s)

Many models available

Location

Cathode rodding

Key function(s)

Cathode rodding operations

Request a data sheet

Model : E48

Preheating System for Crush Breaker Concrete Insulation

This equipment can heat a concrete section up to 130C. It is made of a heating unit and of a heating sheet, which wraps up the concrete section.

Key feature(s)

Portable

Location

Potlining

Key function(s)

Concrete heating

Request a data sheet

Model : E49

Positive Risers Straightening System

The positive risers straightening system can rectify (straighten) the shape of positive risers. Having an hydraulic system, the equipment is activated by compressed air.

Key feature(s)

Removable parts

Location

Potroom

Key function(s)

Positive risers straightening

Request a data sheet

Model : E50

Cathode Sealing Machine

The cathode sealing machine (type S) is designed to be used within the cathode sealing line. Equipped with a standard ramming module, it can perform the ramming of the paste.

Key feature(s)

Designed for cathode sealing line

Location

Cathode rodding

Key function(s)

Ramming of the paste

Request a data sheet

Model : E51

Potshell Straightening Machine

The potshell straightening machine is designed to repair used and deformed potshells within the pot repair shop. The equipment can straighten lateral sides and end walls of a pot. It is made of an independent mobile unit and of straightening accessories.

Key feature(s)

Operated by remote control

Location

Potshell repair

Key function(s)

Potshell straightening

Request a data sheet

Model : E52

Trailer for Potlining Machine E60

This trailer has the capacity to carry or store a complete potlining machine E60 (with lifting and ramming modules).

Key feature(s)

Can transport a complete potlining machine E60 (no dismantling required)

Location

Potlining

Key function(s)

Transport or storage of a potlining machine E60

Request a data sheet

Model : E52

Trailer for Pot Ramming Machine E61

This trailer has the capacity to carry or store a complete pot ramming machine E61 (with ramming module).

Key feature(s)

Can transport a complete pot ramming machine E61 (no dismantling required)

Location

Pot ramming

Key function(s)

Transport or storage of a pot ramming machine E61

Request a data sheet

Model : E53

Cathode Bar Extractor

The cathode bar extractor can extract cathode bars from a sealed cathode block. It is made of a boggey with a winch and rollers.

Key feature(s)

Extracts cathode bars from a sealed cathode block

Location

Cathode rodding

Key function(s)

Cathode bars extraction

Request a data sheet

Model : E55

Superstructure Safety Guard

This equipment can be used to create a safety zone on a superstructure top.

Key feature(s)

Removable parts

Location

Superstructure repair shop

Key function(s)

Safe access

Request a data sheet

Model : E57

Hydraulic Positioning Equipment

Various hydraulic jacks and accessories (such as adapted structure). It can be used during brickwork operation.

Key feature(s)

Hydraulic system

Location

Potlining

Key function(s)

Positioning equipment

Request a data sheet

Model : E60

Potlining Machine

The potlining machine (PLM) is designed to perform the main steps of the potlining process. Equipped with a collaborative mode and with two interchangeable modules (lifting and ramming), the equipment can precisely install several types of materials (such as bricks, side slabs or cathodes) and perform the ramming of the paste. 

Key feature(s)

Lightweight, rolls on potshell deck plate

Location

Potlining

Key function(s)

Multifunction

Request a data sheet

Model : E60-M

Potlining Machine (magnetic fields option)

The E60-M has the same main functions (materials installation and ramming of the paste) and characteristics (interchangeable module, collaborative module, etc.) of the Potlining Machine E60. It is has some additionnal features which allows the equipment to operate under magnetic fields.

Key feature(s)

Can operate under magnetic fields

Location

Potlining

Key function(s)

Multifunction

Request a data sheet

Model : E61

Pot Ramming Machine

With a view to enhancing the customer experience, Equibras focused on 4 critical parameters in designing its own Pot Ramming Machine PRM: improved used, reduced safety risks, ergonomics and compaction quality. Operationally safer, more precise and equipped with pot ramming quality monitoring, the Equibras Pot Ramming Machine E61 PRM features the following:

  • User-friendly through the complete HMI
  • Safe: no vibration, very low noise level and minimal maintenance
  • Smaller, lighter and ergonomic: rolls on potshell deck plate and operated by remote control
  • Precise movement: ramming by pressure that provides even compaction rate

The Pot Ramming Machine E61 PRM is the most selling ramming machine worldwide since the last decade. 

 

Pot Ramming Machine PRM - Brochure

Article - Simplifying Cell Lining

Article - Aluminium International Today

Article - AlCircle

Video - Pot Ramming Machine PRM

Similar product: Potlining Machine E60

Key feature(s)

Ramming paste compaction on different types of joint

Location

Pot Ramming

Key function(s)

Ramming process

Request a data sheet

Model : Q-11

Removable Platforms

This removable equipment can create a safe workspace within any environment or work floor.

Key feature(s)

Adjustable size

Location

Portable equipment

Key function(s)

Create a safe workspace

Request a data sheet

Model : Q-18

Portable Rack

This rack can be used for the transport and storage of various tools and materials.

Key feature(s)

Portable

Location

Portable equipment

Key function(s)

Transport and storage of materials

Request a data sheet

Model : Q-30

Portable Vacuum

This device can vacuum several type of dusts. It can be adapated as per client needs.

Key feature(s)

Portable

Location

Portable Equipment

Key function(s)

Cleaning

Request a data sheet

Model : Q-58

Mobile Handling Gantry

This mobile gantry can move on multiple surfaces thanks to its wheels. Having a module equipped with chain hoists, the gantry is compatible with different accessories that can handle many materials.

Key feature(s)

Mobile equipment

Location

Handling

Key function(s)

Materials handling

Request a data sheet

Model : Q02

Box for Tools

Box for tools that can be adapted to the client needs. Different models available. 

Key feature(s)

Can be adapted as per client needs

Location

Custom equipment

Key function(s)

Storage for tools

Request a data sheet

Model : Q04

Heating System for Surface

Made of a heating unit and of an insulating mattress, this system is designed to pre-heat different type of surfaces.  It also allows to maintain the temperature at a stable level.

Key feature(s)

Collaborative heating mode

Location

Heating

Key function(s)

Surfaces heating

Request a data sheet

Model : Q06

Cutting Saw for Materials

The table saw E06 cuts multiple bricks at the same time, while avoiding any contact between operator and materials during operation. It can be used for any operation involving brick cutting and can be adapted as per client needs.

Key feature(s)

Automatic cutting

Location

Custom equipment

Key function(s)

Materials cutting

Request a data sheet

Model : Q07

Safety System Ready to Mount

The safety system is designed to create a safe workspace. Made of mobile working platforms and of safety guards, the equipment is ready to mount wherever needed.

Key feature(s)

Ready to mount

Location

Safety and Access

Key function(s)

Safe working area

Request a data sheet

Model : Q08

Vacuum Handling Device

Having a vacuum system, this device can lift several type of materials without damaging them.

Key feature(s)

Vacuum system

Location

Lifting

Key function(s)

Materials lifting

Request a data sheet

Model : Q10

Portable Mixer

Different models of mixers are available. European and american standards available.

Key feature(s)

Many models available

Location

Portable equipment

Key function(s)

Concrete and cement mixing

Request a data sheet

Model : Q11

Removable Work Platforms

This removable equipment can create a safe workspace within any environment or work floor.

Key feature(s)

Adjustable size

Location

Safety and Access

Key function(s)

Create a safe workspace

Request a data sheet

Model : Q18

Handling Platform

This platform can be used for the transport and storage of various tools and materials.

Key feature(s)

Portable

Location

Handling

Key function(s)

Transport and storage of materials

Request a data sheet

Model : Q22

Access Stairs

The access stairs have a self-adjusting system which allows an easy positioning during their installation.

Key feature(s)

Different models available

Location

Safety and Access

Key function(s)

Safe Access

Request a data sheet

Model : Q23

Wheelbarrow

This equipment can transport materials (such as cement and concrete) from the mixer to wherever needed. Having a pneumatic system, it can unload its content autonomously, without an external source of power.

Key feature(s)

Autonomous unloading of materials

Location

Portable equipment

Key function(s)

Materials transport

Request a data sheet

Model : Q24

Lifting Fork

This fork can be installed on lifting appliances. Having an adjustable height, it can lift different types of materials and pallets.

Key feature(s)

Self-adjusting system

Location

Lifting

Key function(s)

Materials lifting

Request a data sheet

Model : Q27

Welding Station

The welding station has a welding module that can be directly installed on the surface to be repaired. Thanks to its collaborative mode, the equipment can automatically perform the welding operation.

Key feature(s)

Collaborative mode

Location

Custom equipment

Key function(s)

Automatic welding

Request a data sheet

Model : Q30

Vacuum

This device can vacuum several type of dusts. It can be adapated as per client needs.

Key feature(s)

Portable

Location

Custom equipment

Key function(s)

Cleaning

Request a data sheet

Model : Q33

Rotator / Carrier for Structure

This equipment can support and rotate structures on 360o. Equipped with a mobile pivot system, the rotator can be manually operated. 

Key feature(s)

Manual rotation

Location

Handling

Key function(s)

Rotation and transport of structure

Request a data sheet

Model : Q36

Insulating Mattress

This mattress is designed to be installed on surfaces (or materials) in order to maintain their temperature at a stable level.

Key feature(s)

Can be adapated as per client needs

Location

Heating

Key function(s)

Maintains the temperature

Request a data sheet

Model : Q38

Pre-Heating and Insulating Box

This equipment is designed to transport and pre-heat materials at a stable level of temperature.

Key feature(s)

Homogeneous temperature distribution

Location

Heating

Key function(s)

Transport and pre-heating of temperature

Request a data sheet

Model : Q39

Insulating Tent

Made of a tent and of an electric heating unit, this equipment allows to homogeneously heat materials.

Key feature(s)

Compatible with different type of materials

Location

Heating

Key function(s)

Materials heating

Request a data sheet

Model : Q42

Portable Lifting Beam

This lifting beam is designed to be installed on different lifting devices. It can lift different type of materials and move them to wherever needed.

Key feature(s)

Compatible with different lifting appliances

Location

Lifting

Key function(s)

Lifting and handling of materials

Request a data sheet

Model : Q42

Handling Beam

This handling beam is designed to be installed on different handling devices. It can lift different type of materials and move them to wherever needed.

Key feature(s)

Compatible with different handling appliances

Location

Handling

Key function(s)

Materials handling

Request a data sheet

Model : Q43

Various Generic Tools

Various generic tools that can be adapted as per client needs.

Key feature(s)

Can be adapted as per client needs

Location

Custom equipment

Key function(s)

Various tools

Request a data sheet

Model : Q48

Device for Concrete Pre-Heating

This equipment can heat a concrete section up to 130oC.  It is made of a heating unit and of a flexible heating sheet, which wraps up the concrete section.

Key feature(s)

Portable

Location

Heating

Key function(s)

Concrete pre-heating

Request a data sheet

Model : Q52

Trailer for Equipment

This trailer can transport different type of materials such as the Pot Ramming Machine - PRM E61

Key feature(s)

Compatible with various equipment

Location

Handling

Key function(s)

Equipment transport

Request a data sheet

Model : Q55

Temporary Safety Guards

The safety guards are designed to create safe access on structures or workspace.

Key feature(s)

Removable equipment

Location

Safety and Access

Key function(s)

Safe workspace

Request a data sheet

Model : Q58

Lifting and Handling Gantry

This mobile gantry can move on multiple surfaces thanks to its wheels. Having a module equipped with chain hoists, the gantry is compatible with different accessories that can lift / handle many type of materials. The equipment can also be adapted as per client needs.

Key feature(s)

Multifunction

Location

Custom equipment

Key function(s)

Lifting and handling of materials

Request a data sheet

Model : Q60

Mobile Gantry

This gantry can move on multiple surfaces thanks to its wheels. Having a module equipped with chain hoists, the gantry is compatible with different accessories that can lift / handle many materials.

Key feature(s)

Mobile equipment

Location

Lifting

Key function(s)

Materials lifting

Request a data sheet