Tool box available in different models. Designed for the storage or transport of tools.
Different models available
Carbon / Anode
Storage or transport of tools
The heating system is used to warm up surfaces. It insures an homogeneous control of the temperature. The system is made of a portable heating electric unit that is connected to an inflated mattress.
Homogeneous control of the temperature
Carbon / Anode
Surface preheating
The E06 for brick cutting and assembling, is available in two options: table saw and assembling bench. The table saw cuts multiple bricks at the same time, while avoiding any contact between operator and materials during operation.
The assembling bench is a 2 in 1 equipment that can cut bricks and assembled them in modules. Brick modules are used for the brickwork of the electrolysis cells. Their installation within a pot, is performed with the Potlining Machine E60 and with the brick lifter. Brickwork by brick modules allows considerable optimisation of productivity and safety during this step of the potlining process.
same time. It prevents the operator from having physical contact with the materials during operation.
Can cut several bricks at the same time
Carbon / Anode
Cut of refractory materials
This equipment is made of mobile handrails and platforms. It is designed to create a secure access on a work surface or work area.
Manual installation
Carbon / Anode
Safe access
This equipment is designed to handle and lift refractory materials, thanks to its vacuum system.
Vacuum system
Carbon / Anode
Handling and lifting of refractory materials
Different models of mixers are available. European and american standards available.
Portable
Carbon / Anode
Concrete mixing
The temporary platforms are used to create a safe workspace on a work surface or on operation floor.
Adjustable size
Carbon / Anode
Safe access
This equipment is designed to support temporarily structures, equipment parts and more.
Portable
Carbon / Anode
Temporary support
The portable storage racks can be used to transport and/or store tools and accessories.
Many models available
Carbon / Anode
Transport or storage of tools
This equipment can transport materials (such as cement and concrete) from the mixer to wherever needed. Having a pneumatic system, it can unload its content autonomously, without an external source of power.
Autonomous unloading of materials
Carbon / Anode
Materials transport
The self-balancing fork is used to lift materials and designed to be hooked on lifting/handling appliances. It has an automatic self-balancing system and adjustable height and handles.
Self-balancing system
Carbon / Anode
Materials lifting
This equipment is designed to repair the surface of a structure or equipment. Its milling module grinds the surface area whereas its welding module rebuilds the surface. Automatic milling and welding.
Two modules: milling and welding
Carbon / Anode
Surface repair
Lightweight and portable, this equipment can vacuum the majority of dust type.
Portable
Carbon / Anode
Dust vacuuming
This equipment is used to compact materials (such as sand and other). Different models of pneumatic and electric tamper are available.
Pneumatic or electric tamper
Carbon / Anode
Materials compaction
The lifting beam is designed to lift and/or handle materials (such as blocks and other). It can be hooked on lifting appliances.
Compatible with different lifting appliances
Carbon / Anode
Materials lifting
The removable platform is designed to provide an access to a structure. The equipment is supported by a portable frame.
Manual installation
Carbon / Anode
Safe access
This equipment can be used to create a safety zone on a work area or on the upper part of an equipment or structure.
Removable parts
Carbon / Anode
Safe access
The temporary potlining facility and/or reconfiguration of an existing workshop, can be used as a transition or permanent workshop (as needed).
Includes all the necessary services (eletrical and mechanical)
Potlining
Temporary workshop
Tool box available in different models. Designed for the storage or transport of cathode rodding tools.
DIfferent models available
Cathode Rodding
Storage or transport of tools
Tool box available in different models. Designed for the storage or transport of potlining tools.
Different models available
Potlining
Storage or transport of tools
Tool box available in different models. Designed for the storage or transport of ramming tools.
Different models available
Pot ramming
Storage or transport of tools
Support and fixture used to position the superstructure during maintenance. Tools and equipment available on request.
Can be adapted as per client needs
Superstructure repair shop
Superstructure repair shop
The cathode heating system is used to warm up cathode blocks during cathode rodding operations. It insures an homogeneous control of the temperature. The system is made of a portable heating electric unit that is connected to an inflated mattress.
Homogeneous control of the temperature
Cathode rodding
Cathode blocks preheating
The cathode heating system is used to warm up cathode blocks during potlining operations. It insures an homogeneous control of the temperature. The system is made of a portable heating electric unit that is connected to an inflated mattress.
Homogeneous control of the temperature
Potlining
Cathode blocks preheating
The cathode heating system is used to warm up cathode blocks during pot ramming operations. It insures an homogeneous control of the temperature. The system is made of a portable heating electric unit that is connected to an inflated mattress.
Homogeneous control of the temperature
Pot ramming
Cathode blocks preheating
The E06 for brick cutting and assembling, is available in two options: table saw and assembling bench. The table saw cuts multiple bricks at the same time, while avoiding any contact between operator and materials during operation.
The assembling bench is a 2 in 1 equipment that can cut bricks and assembled them in modules. Brick modules are used for the brickwork of the electrolysis cells. Their installation within a pot, is performed with the Potlining Machine E60 and with the brick lifter. Brickwork by brick modules allows considerable optimisation of productivity and safety during this step of the potlining process.
Can cut several bricks at the same time
Potlining
Cut of refractory materials
This equipment is made of mobile handrails and platforms. It is designed to provide a secure access on adjacent operated pots during pot replacement.
Manual installation
Potroom
Safe access
The equipment is designed to handle and carry refractory materials during potlining operations.
Vacuum system
Potlining
Handling and carrying of refractory materials
This equipment is used to hold the positive risers weight during the transport of a superstructure. The support can fit a superstructure in any direction.
Rotary system
Superstructure repair shop
Positive risers support
Different models of mixers are available. European and american standards available.
Many models available
Potlining
Concrete mixing
The temporary bus bar platforms create a safe workspace on the bus bar level and on operation floor within potroom.
Adjustable size
Potroom
Safe access
This equipment is designed to support temporarily the straight gas exhaust duct throughout the removal of a superstructure.
Adjustable height
Potroom
Temporary support
This equipment can adjust the level of a superstructure anode beam and. It can also supply power to DPA and verify their functioning.
Controls the mechanism of a superstructure anode beam
Superstructure repair shop
Anode beam adjustment
The flashing safety light can delimit a work area within an operating or non-operating, environment. It works without an external power source and can operate under the influence of magnetic fields.
Works without an external source of power
Potroom
Work area delimitation
The portable storage rack can be used to transport and/or store accessories used within superstructure repair shop operations.
Many models available
Superstructure repair shop
Transport or storage of superstructure repair shop accessories
The portable storage rack can be used to transport and/or store accessories used within potlining operations.
Many models available
Potlining
Transport or storage of potlining accessories
The portable storage rack can be used to transport and/or store accessories used within pot ramming operations.
Many models available
Pot ramming
Transport or storage of pot ramming accessories
This trailer can move and/or store a complete superstructure.
Portable equipment (wheels)
Superstructure repair shop
Transport and storage of superstructure
The potlining stairs are designed to provide a safe access to a pot during the potlining process. They have a self-adjusting system which activates during installation.
Different models available
Potlining
Safe access
This equipment can transport materials (such as cement and concrete) from the mixer to wherever needed. Having a pneumatic system, it can unload its content autonomously, without an external source of power.
Autonomous unloading of materials
Potlining
Materials transport
The self-balancing fork is used to lift materials (such as bricks or pallets) and designed to be hooked on lifting/handling appliances (such as the potlining machine E60). It has an automatic self-balancing system and adjustable height and handles.
Self-balancing system
Potlining
Materials lifting
This equipment is designed to repair the anodic contacts zone of a superstructure anodic beam. Its milling module grinds the contact area whereas its welding module rebuilds the aluminium surface. Automatic milling and welding.
Two modules: milling and welding
Superstructure repair shop
Anodic contacts zone repair
Besides being lightweight and portable, this equipment can vacuum the majority of dust type.
Portable
Potlining
Dust vacuuming
This equipment can vacuum the majority of dust type. It is lightweight and portable. Designed to be used within the pot ramming process.
Portable
Pot ramming
Dust vacuuming
This equipment is used to compact the ramming paste during the potlining process. Different models of pneumatic and electric tamper are available.
Pneumatic or electric tamper
Potlining
Ramming paste compaction
This equipment is used to compact the ramming paste during the pot ramming process. Different models of pneumatic and electric tamper are available.
Pneumatic or electric tamper
Pot ramming
Compaction of the ramming paste
This equipment can carry and rotate a complete superstructure on 360o. Equipped with a pivot system, the rotator is operated manually (no external source of power).
Manual rotation
Superstructure repair shop
Rotation of a superstructure
The insulating blanket is used to maintain the cathode blocks temperature on a stable level during the potlining process.
Even temperature distribution
Potlining
Maintain the cathode blocks temperature
The insulating blanket is used to maintain the cathode blocks temperature on a stable level during the pot ramming process.
Even temperature distribution
Pot ramming
Maintain the temperature of cathode blocks
The heated box for lining paste is designed to transport the lining paste and to keep its temperature stable.
Even temperature distribution
Potlining
Transport and heating of lining paste
The heated box for lining paste is designed to transport the lining paste and to keep its temperature stable.
Even temperature distribution
Pot ramming
Transport and heating of lining paste
The paste heating tent is designed to homogeneously heat the lining paste during the potlining process. It is made of an heating tent and of an electric unit.
Even temperature distribution
Potlining
Lining paste heating
The paste heating tent is designed to homogeneously heat the lining paste during the pot ramming process. It is made of an heating tent and of an electric unit.
Even temperature distribution
Pot ramming
Lining paste heating
This equipment can preheat a pot In Situ during the potlining process. It is designed to optimize the work area.
Optimize work area
Potlining
Preheating of a pot In Situ
This equipment can preheat a pot In Situ during the ramming process. It designed to optimize the work area.
Optimize work area
Pot ramming
Preheating of a pot In Situ
This equipment is used to preheat a pot In SItu. The tent fits within the dimensions of the potlining machine E60, and is able to ''follow'' its movements.
Installed on a pot In Situ and on potlining machine E60
Potlining
Preheating of a pot In Situ
This equipment is used to preheat a pot In Situ. The tent fits within the dimensions of the pot ramming machine E61, and is able to ''follow'' its movements.
Installed on a pot In Situ and on pot ramming machine E61
Pot Ramming
Preheating of a pot In Situ
The cathode lifting beam is designed to lift and/or handle cathode blocks during cathode rodding operations. It can be hooked on lifting appliances (such the potlining machine E60).
Can be used with different lifting appliances
Cathode rodding
Cathode blocks lifting
The cathode lifting beam is designed to lift and/or handle cathode blocks during potlining operations. It can be hooked on lifting appliances (such the potlining machine E60).
Compatible with different lifting appliances
Potlining
Cathode blocks lifting
Engineering and manufacturing of various tools for potlining operations.
Many models available
Potlining
Tools for potlining operations
Engineering and manufacturing of various tools for pot ramming operations.
Many models available
Pot ramming
Tools for pot ramming operations
The spout removable platform is designed to provide an access to a superstructure spouts during operation. The equipment is supported by a portable frame, retained by the superstructure ceiling.
Manual installation
Potroom
Safe access
Engineering and manufacturing of various tools for pot start-up.
Many models available
Potroom
Tools for pot start-up
Engineering and manufacturing of various tools for cathode rodding operations.
Many models available
Cathode rodding
Cathode rodding operations
This equipment can heat a concrete section up to 130o C. It is made of a heating unit and of a heating sheet, which wraps up the concrete section.
Portable
Potlining
Concrete heating
The positive risers straightening system can rectify (straighten) the shape of positive risers. Having an hydraulic system, the equipment is activated by compressed air.
Removable parts
Potroom
Positive risers straightening
The cathode sealing machine (type S) is designed to be used within the cathode sealing line. Equipped with a standard ramming module, it can perform the ramming of the paste.
Designed for cathode sealing line
Cathode rodding
Ramming of the paste
The potshell straightening machine is designed to repair used and deformed potshells within the pot repair shop. The equipment can straighten lateral sides and end walls of a pot. It is made of an independent mobile unit and of straightening accessories.
Operated by remote control
Potshell repair
Potshell straightening
This trailer has the capacity to carry or store a complete potlining machine E60 (with lifting and ramming modules).
Can transport a complete potlining machine E60 (no dismantling required)
Potlining
Transport or storage of a potlining machine E60
This trailer has the capacity to carry or store a complete pot ramming machine E61 (with ramming module).
Can transport a complete pot ramming machine E61 (no dismantling required)
Pot ramming
Transport or storage of a pot ramming machine E61
The cathode bar extractor can extract cathode bars from a sealed cathode block. It is made of a boggey with a winch and rollers.
Extracts cathode bars from a sealed cathode block
Cathode rodding
Cathode bars extraction
This equipment can be used to create a safety zone on a superstructure top.
Removable parts
Superstructure repair shop
Safe access
Various hydraulic jacks and accessories (such as adapted structure). It can be used during brickwork operation.
Hydraulic system
Potlining
Positioning equipment
The potlining machine (PLM) is designed to perform the main steps of the potlining process. Equipped with a collaborative mode and with two interchangeable modules (lifting and ramming), the equipment can precisely install several types of materials (such as bricks, side slabs or cathodes) and perform the ramming of the paste.
Lightweight, rolls on potshell deck plate
Potlining
Multifunction
The E60-M has the same main functions (materials installation and ramming of the paste) and characteristics (interchangeable module, collaborative module, etc.) of the Potlining Machine E60. It is has some additionnal features which allows the equipment to operate under magnetic fields.
Can operate under magnetic fields
Potlining
Multifunction
With a view to enhancing the customer experience, Equibras focused on 4 critical parameters in designing its own Pot Ramming Machine PRM: improved used, reduced safety risks, ergonomics and compaction quality. Operationally safer, more precise and equipped with pot ramming quality monitoring, the Equibras Pot Ramming Machine E61 PRM features the following:
The Pot Ramming Machine E61 PRM is the most selling ramming machine worldwide since the last decade.
Pot Ramming Machine PRM - Brochure
Article - Simplifying Cell Lining
Article - Aluminium International Today
Video - Pot Ramming Machine PRM
Similar product: Potlining Machine E60
Ramming paste compaction on different types of joint
Pot Ramming
Ramming process
Box for tools that can be adapted to the client needs. Different models available.
Can be adapted as per client needs
Custom equipment
Storage for tools
Made of a heating unit and of an insulating mattress, this system is designed to pre-heat different type of surfaces. It also allows to maintain the temperature at a stable level.
Collaborative heating mode
Heating
Surfaces heating
The table saw E06 cuts multiple bricks at the same time, while avoiding any contact between operator and materials during operation. It can be used for any operation involving brick cutting and can be adapted as per client needs.
Automatic cutting
Custom equipment
Materials cutting
The safety system is designed to create a safe workspace. Made of mobile working platforms and of safety guards, the equipment is ready to mount wherever needed.
Ready to mount
Safety and Access
Safe working area
Having a vacuum system, this device can lift several type of materials without damaging them.
Vacuum system
Lifting
Materials lifting
Different models of mixers are available. European and american standards available.
Many models available
Portable equipment
Concrete and cement mixing
This removable equipment can create a safe workspace within any environment or work floor.
Adjustable size
Safety and Access
Create a safe workspace
This removable equipment can create a safe workspace within any environment or work floor.
Adjustable size
Portable equipment
Create a safe workspace
This platform can be used for the transport and storage of various tools and materials.
Portable
Handling
Transport and storage of materials
This rack can be used for the transport and storage of various tools and materials.
Portable
Portable equipment
Transport and storage of materials
The access stairs have a self-adjusting system which allows an easy positioning during their installation.
Different models available
Safety and Access
Safe Access
This equipment can transport materials (such as cement and concrete) from the mixer to wherever needed. Having a pneumatic system, it can unload its content autonomously, without an external source of power.
Autonomous unloading of materials
Portable equipment
Materials transport
This fork can be installed on lifting appliances. Having an adjustable height, it can lift different types of materials and pallets.
Self-adjusting system
Lifting
Materials lifting
The welding station has a welding module that can be directly installed on the surface to be repaired. Thanks to its collaborative mode, the equipment can automatically perform the welding operation.
Collaborative mode
Custom equipment
Automatic welding
This device can vacuum several type of dusts. It can be adapated as per client needs.
Portable
Custom equipment
Cleaning
This device can vacuum several type of dusts. It can be adapated as per client needs.
Portable
Portable Equipment
Cleaning
This equipment can support and rotate structures on 360o. Equipped with a mobile pivot system, the rotator can be manually operated.
Manual rotation
Handling
Rotation and transport of structure
This mattress is designed to be installed on surfaces (or materials) in order to maintain their temperature at a stable level.
Can be adapated as per client needs
Heating
Maintains the temperature
This equipment is designed to transport and pre-heat materials at a stable level of temperature.
Homogeneous temperature distribution
Heating
Transport and pre-heating of temperature
Made of a tent and of an electric heating unit, this equipment allows to homogeneously heat materials.
Compatible with different type of materials
Heating
Materials heating
This lifting beam is designed to be installed on different lifting devices. It can lift different type of materials and move them to wherever needed.
Compatible with different lifting appliances
Lifting
Lifting and handling of materials
This handling beam is designed to be installed on different handling devices. It can lift different type of materials and move them to wherever needed.
Compatible with different handling appliances
Handling
Materials handling
Various generic tools that can be adapted as per client needs.
Can be adapted as per client needs
Custom equipment
Various tools
This equipment can heat a concrete section up to 130oC. It is made of a heating unit and of a flexible heating sheet, which wraps up the concrete section.
Portable
Heating
Concrete pre-heating
This trailer can transport different type of materials such as the Pot Ramming Machine - PRM E61
Compatible with various equipment
Handling
Equipment transport
The safety guards are designed to create safe access on structures or workspace.
Removable equipment
Safety and Access
Safe workspace
This mobile gantry can move on multiple surfaces thanks to its wheels. Having a module equipped with chain hoists, the gantry is compatible with different accessories that can handle many materials.
Mobile equipment
Handling
Materials handling
This mobile gantry can move on multiple surfaces thanks to its wheels. Having a module equipped with chain hoists, the gantry is compatible with different accessories that can lift / handle many type of materials. The equipment can also be adapted as per client needs.
Multifunction
Custom equipment
Lifting and handling of materials
This gantry can move on multiple surfaces thanks to its wheels. Having a module equipped with chain hoists, the gantry is compatible with different accessories that can lift / handle many materials.
Mobile equipment
Lifting
Materials lifting